Electronic components
pF Capacitors
Small-value picofarad capacitors for high-frequency, oscillator, timing and filtering requirements across India. Send the pF value, voltage rating, tolerance, package, quantity and delivery city for a quotation.
- Picofarad
- pF
- One trillionth of a farad
- 10⁻¹² F
- = 1 nF
- 1,000 pF

Definition
What is a pF capacitor?
A pF capacitor is a small-value capacitor rated in picofarads (pF). One picofarad is one trillionth of a farad (10⁻¹² F). pF capacitors are commonly used in high-frequency, oscillator, timing and filtering circuits.
Most are ceramic capacitors, in through-hole or surface-mount (SMD) packages. V Bright Electronics India handles pF capacitor requirements in India — share the capacitance in pF, the voltage rating and the package, or a photo of the marking, and we’ll help identify suitable options.
Markings
How are pF values marked?
Small capacitors usually carry a short code. A three-digit code gives the value in picofarads: two digits followed by the number of zeros. Small values may be printed directly, or with a “p” in place of the decimal point.
- Three-digit code
- 101 means 10 followed by one zero: 100 pF. 471 is 470 pF; 102 is 1,000 pF (1 nF).
- Value printed directly
- Small values are often printed as a plain number, such as 22 or 33, meaning 22 pF or 33 pF.
- “p” as the decimal point
- 4p7 means 4.7 pF and 1p5 means 1.5 pF.
- Tolerance letter
- A letter after the code often indicates tolerance — check the datasheet or send a photo of the marking.
Marking hard to read? Send a clear photo of the capacitor, or the value from your circuit diagram or BOM.
Range
pF capacitor requirements
pF capacitors commonly come in two formats. The capacitance, voltage rating and package identify the part.

Ceramic disc capacitors
Through-hole ceramic capacitors in small pF values, for general and high-frequency circuits. The value is usually printed as a code on the disc.
Photo: oomlout (edited), CC BY-SA 2.0
SMD ceramic capacitors
Surface-mount multilayer ceramic chip capacitors in pF values, for compact and machine-assembled boards. Often unmarked — the value comes from the reel label or BOM.
Photo: oomlout (edited), CC BY-SA 2.0
Requirements also include
Oscillator and crystal capacitors
Small values used alongside crystals and oscillator circuits.
High-frequency circuits
pF values for RF, signal and high-frequency filtering stages.
Replacement capacitors
Matching an existing capacitor by its marking, size and voltage.
Specific values
A particular pF value, tolerance or voltage rating — send it with your BOM.
Applications
Where pF capacitors are used
pF capacitors appear wherever a circuit needs a small, precise capacitance. Common applications include:
Oscillator circuits
Load capacitors for crystals, and timing in oscillator stages.
High-frequency and RF
Tuning, coupling and filtering in radio-frequency circuits.
Filtering
Removing high-frequency noise from signal lines.
Timing circuits
Small time constants alongside resistors.
Signal coupling
Passing high-frequency signals between stages.
Repair and replacement
Replacing a failed small-value capacitor in existing equipment.
Selection
How to choose a pF capacitor
Share these details for each capacitor. For several values, a BOM is the quickest way.
Capacitance in pF
The value — or the code printed on the capacitor, such as 101 or 4p7.
Voltage rating
The rated voltage; match or exceed the original.
Tolerance
How close to the marked value it must be, if your circuit specifies it.
Dielectric type
If specified in your design or datasheet.
Package
Through-hole (and lead spacing) or SMD (and size).
Quantity
How many of each value you need.
FAQ
Questions about pF capacitors
Have a question about a specific part? Ask us with the part number or a photo.
Ask on WhatsAppWhat does pF mean on a capacitor?
pF stands for picofarad, a unit of capacitance equal to one trillionth of a farad (10⁻¹² F). 1,000 pF equals 1 nF.
What are pF capacitors used for?
Mainly in high-frequency, oscillator, timing and filtering circuits — for example as load capacitors for crystals, or to filter high-frequency noise.
How do I read a pF capacitor code?
For a three-digit code, the first two digits are the value and the third is the number of zeros, in pF: 101 is 100 pF and 471 is 470 pF. 4p7 means 4.7 pF.
What details should I send for a pF capacitor requirement?
The capacitance in pF (or the printed code), voltage rating, tolerance if specified, package and quantity. A clear photo of the marking helps for replacements.
Can I send a photo of the capacitor I need?
Yes. A clear photo of the capacitor and its marking can help identify the value and a suitable option.
Can I include pF capacitors in a BOM with other components?
Yes. Send the complete BOM, and V Bright Electronics India will help identify suitable options for every part.
Need a specific pF capacitor?
Send the capacitance in pF or the printed code, voltage rating, package and quantity — or a photo of the marking — and we’ll help identify suitable options.



