LED & display
SMD & DIP LEDs
LED formats for compact surface-mount designs, through-hole assemblies and display applications.
Surface-mount
Through-holeDefinition
What is the difference between SMD and DIP LEDs?
SMD LEDs are mounted directly onto the surface of a circuit board, while DIP LEDs typically use leads that pass through holes in the board. The appropriate format depends on the circuit, assembly method and application.
SMD stands for surface-mount device; DIP LEDs are the through-hole type, with wire leads. Both produce light the same way — they differ in package and mounting. V Bright Electronics India handles SMD and DIP LED requirements in India for display, indicator and assembly work.
Comparison
SMD LED vs DIP LED
Choose by how the board is built and what the LED needs to do. SMD LEDs suit surface-mount assembly and compact layouts; DIP LEDs suit through-hole boards and hand assembly. Neither format is better for every job.

SMD LED
A compact LED package soldered directly onto pads on the surface of the circuit board.

DIP LED
An LED with wire leads that pass through holes in the board and are soldered on the other side.
Range
SMD and DIP LED requirements
Requirements commonly include the following. The format, size or package and colour identify the LED.
SMD LEDs
Surface-mount LED packages for machine-assembled and compact boards.
DIP LEDs
Through-hole LEDs with leads, for hand-assembled boards and indicators.
Sizes and packages
Different package sizes and lens shapes — share the one your design uses.
Colours
Share the colour of light your design needs, or the existing LED’s colour.
Display LEDs
LEDs for display boards, numeric displays and signage assemblies.
Replacement LEDs
Matching an existing SMD or DIP LED by its package, colour or a photo.
Applications
Where SMD and DIP LEDs are used
Both formats are used across display, indicator and lighting work. Common applications include:
LED displays
The light source on display boards and numeric displays.
Electronic indicators
Status and power lights on devices and boards.
Signage
Lit signs and illuminated boards.
PCB assemblies
Surface-mount and through-hole circuit board production.
Control panels
Indicators on panels, switchgear and machinery.
Lighting products
LED modules and small lighting assemblies.
Repair and replacement
Replacing a failed LED on an existing board.
Selection
What to include for an SMD or DIP LED
Share these details for each LED. For several parts, a BOM is the quickest way.
SMD or DIP
Surface-mount or through-hole — the format your board uses.
Size or package
The package size or lens size, from the datasheet, reel label or the existing LED.
Colour
The colour of light, and the lens if it matters.
Application
Display, indicator or lighting — it helps confirm a suitable option.
Electrical specification
Forward voltage and current, if known.
Quantity
A few pieces or a production quantity.
Photo or part details
The part number, reel label or a clear photo of the existing LED.
FAQ
Questions about SMD & DIP LEDs
Have a question about a specific part? Ask us with the part number or a photo.
Ask on WhatsAppWhat is an SMD LED?
An SMD (surface-mount device) LED is a compact LED package soldered directly onto pads on the surface of a circuit board, without leads passing through it. It is widely used in modern, machine-assembled electronics.
What is a DIP LED?
A DIP LED is a through-hole LED: its wire leads pass through holes in the circuit board and are soldered on the other side. It is common in indicators, displays and hand-assembled boards.
What is the difference between SMD and DIP LEDs?
The package and mounting. SMD LEDs mount on the board surface and are compact; DIP LEDs have leads that go through the board. The right choice depends on the circuit, assembly method and application.
Is an SMD LED better than a DIP LED?
Not in every case. SMD suits compact, machine-assembled boards; DIP suits through-hole designs, hand assembly and some indicator and display uses. Match the format to your board and application.
How are SMD LED sizes described?
SMD LED packages are often named by their dimensions — 5050, for example, is about 5.0 × 5.0 mm. Check the reel label or datasheet, measure the LED, or send a photo.
Can I order SMD and DIP LEDs together?
Yes. Send both in one list or BOM with the format, size, colour and quantity for each, and V Bright Electronics India will help identify suitable options.
Need SMD or DIP LEDs?
Send the format, size or package, colour and quantity — or a photo of the existing LED — and we’ll help identify suitable options.

