Knowledge CentreBuying Guides

How to prepare a BOM or component requirement for faster sourcing

What a BOM contains, the details that let every line be identified first time, and a simple layout you can copy for your next requirement.

Published

Pick-and-place machine assembling a circuit board

Short answer

A BOM (bill of materials) lists every part a product or requirement needs, one line per part, with its part number, description, value or specification, package and quantity. The clearer each line, the faster it can be matched to the right product: give the complete part number where you have it, the key specification where you don’t, and say whether alternatives are acceptable.

What does a BOM contain?

A bill of materials is a structured list of the parts needed to build or repair something. Each line describes one part and how many are needed. A spreadsheet is all it takes — what matters is that every line is complete and can only mean one thing.

  • Line number, and the reference on the board where you have it (R1–R4, U1).
  • Part number.
  • Description — what the part is.
  • Value or specification — which one.
  • Package.
  • Quantity.
  • Whether an alternative is acceptable.
  • Notes: preferred makes, photos, anything unusual.

A simple BOM layout

Here’s a layout to copy. One line per distinct part; a part used in several places shares one line, with the total quantity.

Example BOM
LineReferencePart numberDescriptionValue / specificationPackageQtyAlternative OK?
1D1–D41N4007Rectifier diode1 A, 1000 VThrough-hole, axial400Yes, same ratings
2R1–R6—Metal film resistor4.7 kΩ ±1%, ¼ WThrough-hole600Yes
3C1—Electrolytic capacitor470 µF, 25 V, 105 °CRadial, 10 mm diameter100Yes, same size or smaller
4U1NE555Timer IC—DIP-8100No — exact part
5U1 socket—IC socket8‑pin, narrow (0.3 inch)DIP100Yes
6K1—Relay12 V DC coil, SPDT, 10 A contactsPCB100Same footprint only
7DS1—7‑segment displayCommon cathode, 1 digit, 0.56 inch, redThrough-hole100Same pin layout only
An illustrative layout for 100 boards. The part numbers are common generic types used as examples — not a stock list.

Why is the part number so important?

A complete part number identifies a part exactly — its type, ratings and package. Give every character, including prefixes and suffixes, because they often change the package or grade. How to identify an IC explains why.

Generic parts such as resistors and capacitors don’t always need one: a full specification — value, tolerance or voltage rating, and package — identifies them just as well.

What should the description and specification say?

The description says what the part is; the specification says which one. Together they rescue a line when the part number is missing or unclear.

Quantity and package

Give the total quantity for each line across the whole requirement — or the quantity per board and the number of boards, clearly labelled. A list that mixes the two is one of the most common sources of errors.

The package matters as much as the value: a through-hole part won’t fit an SMD footprint. State through-hole or SMD, and the size code or package name where you know it.

Are alternatives acceptable?

Saying which lines can take an equivalent part speeds up sourcing, especially when an exact part is hard to find.

  • Exact part only: where the circuit depends on a specific device, or the product was approved with that part.
  • Equivalent acceptable: same specification and package, any make.
  • Same footprint only: where a different part would mean changing the board.

If you have preferred manufacturers, note them on the line.

Should I send photos for replacement parts?

Yes. For repairs and replacements, a clear photo often identifies a part faster than a description. Photograph the markings straight on, in good light, plus a wider shot of the part on the board — and put the line number in the file name so each photo matches its line.

How should I organise multiple requirements?

  • One line per distinct part; combine identical parts into one line with the total quantity.
  • Group lines by type — resistors, capacitors, semiconductors, displays, power — so related parts are checked together.
  • Keep separate projects in separate lists or sheets.
  • Use consistent units: kΩ, µF, V, A.
  • Mark what changed when you send a revised list.
  • Send a spreadsheet or PDF rather than a photo of a printout.

Why does clear information reduce errors?

Most sourcing delays come from lines that can mean more than one thing: a part number missing its suffix, a value with no package, a quantity that could be per board or in total. Every unclear line needs a question and an answer before it can be matched.

A complete list can be checked line by line in one pass, so information, availability and a quotation come back sooner — and the parts that arrive are the ones you meant.

How do I send a BOM to V Bright?

Use the requirement form with BOM / Multiple Products selected, or send the list on WhatsApp or by email. Include the quantities, which lines can take alternatives, and photos for replacement parts.

Browse all products or the electronic components range to see the product families V Bright Electronics India deals in.

Key takeaways

  • One line per part: part number, description, specification, package and quantity.
  • Give complete part numbers — prefixes and suffixes included.
  • For generic parts, a full specification identifies them.
  • Make quantities unambiguous: totals, or per board with the board count.
  • Mark which lines accept alternatives, and add photos for replacements.

FAQ

Common questions

Have a question about a specific part? Ask us with the part number or a photo.

Ask on WhatsApp

What does a BOM contain?

One line per part, with its part number, a description, the value or specification, the package, the quantity and, ideally, whether an alternative is acceptable.

Do I need a part number for every line?

No. Generic parts such as resistors and capacitors can be identified by a full specification. For ICs and other specific devices, the complete part number matters.

What format should a BOM be in?

A spreadsheet works best — one row per part and one column per detail. A PDF is fine too. Keep units consistent, and avoid sending a photo of a printed list.

Should quantities be per board or in total?

Either, as long as it’s clear. The simplest is the total for each line, with the number of boards noted at the top.

Can I send photos instead of part numbers?

For replacements, yes — a clear photo of the markings and the part on the board often identifies it. Label each photo with its line number.

Related

Products in this guide

More articles

Have a BOM ready?

Send the complete list with quantities — and photos for any replacement parts.

Include

  • Part numbers
  • Specifications
  • Packages
  • Quantities
  • Alternatives